I checked Homonhon island. Like in Suluan and Sulangan, the buildings seem to be complete. However, when I switched through the images, I found a new open-pit mine near the school. This is an issue that has to be mapped properly, so I digitised the mine.

Today, I tried to check Suluan and Sulangan islands. It looks like the buildings are complete. It seems that majority of the building features have been traced during the Haiyan response. The high-resolution images are gone now, but I think it would be very useful to get fresh imagery for updating the map of the settlements years after the disaster.

2019 is starting as busy and hectic as 2018 ended, so this will be a very brief review of 2018 as a Voting Member of the Humanitarian OpenStreetMap Team (HOT) but more importantly a globally active OSM contributor.

The Big Important Stuff

• AI-Assisted Roads: Since the tail-end of 2017, I have been managing a team for HOT based in our Jakarta office that is working on the Facebook AI-Assisted Roads project. This has been an amazing project, (personally for getting to work with the team in-person for a week) but is also a great collaboration and use-case for machine learning in mapping/OSM.
• Disaster Response: In 2018, HOT activated to coordinate or support coordination for 24 disaster incidents. Our next biggest year, in terms of number of recorded responses (obviously there’s always some small incidents that we never hear about or get involved with, but local OSM-ers map so we don’t know to count those), was 2010 - the year HOT was founded - with 10 responses. This shows our ability to react quicker, have the capacity to often coordinate multiple responses at once, and that we’re doing a better job documenting responses we are involved in (and maybe that there were just a lot of disasters in 2018).
• HOT Governance: There is still a lot of work to be done, but I remain an active participant in HOT governance. Most notably in 2018, I committed to helping write the first Strategic Plan which we just finished drafting on December 28th - now it’s off to the Board and Executive Director for review and if all goes well - to membership vote during the Annual Meeting.

The Fun Stuff

… See full entry

A review of my OSM activities for 2018 is noteworthy and sharing .And sincerely,I wish to appreciate all community members who worked with me,assisted me and contributed to these listed moments and milestones of 2018.

1 ..In January,we started with a GIS/Remote Sensing Seminar…Creating awareness of OSM data application.Thanks to Team leaders @uniquemappersteam

2 .March,I successfully hosted the International Women’s Day tagged Geospatial Technology:The Solution for Women Transformation featuring Reasons for International Women’s Day,OSM;the voice for Vulnerable Women,Mapathon Party for Vulnerable Women

3 .In March,I co-founded UnMaidMappersTeam-University of Maiduguri,Borno State with Mamman Ali ,a student of Geography Department ,who visited University of Port Harcourt for one-one training with me and my team leaders.Subsequent training and mentoring continued via webinar and whatsApp chat group for the team that accommodate more than 50 members

4 .I created #AbsuMappersTeam-Abia State University -co-founding with Professor J.U.Ogbonna,the Team Coordinator and Faculty Advisor mentoring via whatsapp chat group,visitation and webinar training

5 . Also in April, we had the emergence of #ImsuMappersTeam-Imo State University,Nigeria in April,with Mr.Lazarus of Geography and Environmental Studies as the Team Coordinator.I mentor via webinar training and whatsapp chat group\

6 . Also a platform was created to establish #FutoMappersTeam and this effort is in progress

7 . In April,I became a HOT-Micrograntee for Nigeria and had the funding support for the purchase of devices (Smartphoines,Laptops and other equipment as well as internet data subscription for community mapping efforts @Uniquemappersteam.

I was also nominated and elected into HOT Voting Membership

8 . in June ,we had our 1st Anniversary mapathon,OSMfight that scaled up edits of uniquemappersteam from 4000 to more than 15,000

… See full entry

Oldenburg is a small town in southeastern Indiana, not far from where I grew up, where German is in some respects the official language. The town is proud of its German heritage. If you rely on a proprietary map for directions from Batesville to Metamora, you’ll probably miss a right turn at Oldenburg, which posts street names in German and only begrudgingly in English.

… See full entry

Setting Goals for DeBigC’s mapping

In the year ahead I want my mapping to be more strategic and pointed. I have set the following goals, to assist it in achieving this. These goals will be hard to achieve in total, but if the majority of them are, I will be very happy since they will mean I am moving towards my goals. I am a board member of OSM Ireland CLG LTD, so just for clarity sake these goals are nothing to do with any position taken by the board or on behalf of the community.

My Hot-Spot

Firstly, I want my heat map to shift to Ireland. I have been a large #MapLesotho contributor, but for my own reasons I want to map Ireland much more. At the moment the largest concentration of my nodes is Lesotho as shown on this heatmap

My Ireland Rank

Next, I want to maintain a top 10 place in the Ireland 2 monthly contributor list. I’m all for other power mappers flexing their muscles, so this is a relative target to whatever they contribute, I will stay up with them.

Map on the move

Ireland doesn’t have a “millionaire” Mapillary user, and there are more than 50 of these worldwide. My target has three aspects,starting with me reaching 1 million images by the end of January 2019 (right now I’m on 913k). I want my Irish image haul to reach 1 million by June 1st.

Mapping Gaps

Regarding my own contributions Dublin is priority. For some reason large parts of North Dublin are not well mapped, with some exceptions like Castleknock and Clontarf, due to the stewardship of large locally focussed mappers. However, there are huge swathes of urban Dublin barely mapped at all aside from landuse and road networks. I’m aiming to map Coolock, Raheny, Drumcondra, Beaumont much more than they are done, to the point where all the buildings in these areas are complete.

I’ve just updated the contributor statistics for the whole year 2018.

As I pointed out here 2017 update blog post some the graphs look a bit odd due to the one-time effect of an initial large number maps.me users contributing as the editing feature was introduced.

This effect continued to decrease during 2018, but for completeness sake here are the updated graphs from the blog post for 2017 that continue to show continuing growth even without maps.me.

… See full entry

I wish you all joyfull mapping in 2019.

I learned a lot and had a lot of fun in 2018 with OSM.

I recently took to completing some of the tasks in the one of the challenges on MapRoulette named Phone or fax number is not in international format (Australia).

The purpose of this entry is to detail my findings in undertaking this challenge relating to the formatting of phone numbers in Australia for OpenStreetMap.

ITU-T E.164 phone number formatting

The formatting as defined in the wiki follows this pattern:

+<country code> <area code> <local number>

This is the ITU-T E.123 and the DIN 5008 pattern and is the assumed preferred pattern given the RFC 3966/NANP pattern is parenthesised and provided secondary on the wiki entry, in addition, the NANP pattern refers to North American use.

Country/area codes for Australia

Using information from the Australian Government website and the Wikipedia page titled Telephone numbers in Australia the following was identified as relating to the above pattern:

The country code for Australia is 61 and applies to both phone numbers and mobile numbers.

The area codes are for sets of states in Australia. These are; New South Wales and Australian Capital Territory as 02, Victoria and Tasmania as 03, Queensland as 07, Western Australia, South Australia and Northern Territory as 08 and applies for phone numbers but not mobile numbers.

The area code for mobile numbers is 04 regardless of state.

The leading 0 in each area code is only retained when calling nationally, whereas when calling internationally (as is the practice for the pattern of phone numbers in OpenStreetMap) the leading 0 is left out.

Examples of Australian formatting

For phone numbers:

+61 x xxxx xxxx

For mobile phones:

+61 4xx xxx xxx

… See full entry

Our underpaid team of data wranglers have been working diligently over the last six months to develop and bring forward our proposal for importing addresses statewide into Massachusetts. This has been no easy process, and has many specific concerns which we’ve been working hard to address over the last six months of development for this plan. We have come up with a multiple phase-based import approach which we believe mitigates data issues while providing high quality data to be imported, sought feedback from our local community, and have now submitted our request for comments to the national imports@ list for further discussion before starting the import process.

As a background, we discovered MassGIS data on address parcels available through the 911 data within the state. The raw data consists of points which are located on top of the building centroids, as far as the state is concerned where the buildings are. For multiple building properties, the address point is located in the center of that property. This is workable, but means the data has to be filtered between the two import phases to fix the correlation between the two types of nodes.

This marks a significant milestone within our local community’s mapping development. Importing addresses to every building in Massachusetts is no small task, but the effect on data quality and usability of OpenStreetMap will be significant. The wiki link for our import proposal can be found here: osm.wiki/Import/Catalogue/MassGIS_Addresses

You are invited to provide feedback on our process on imports@. If you’d like to contribute, we need data wranglers and coders. Feel free to reach out on talk-us-massachusetts or #massachusetts on the OSM US Slack.

1. Fonts missing from OSM Promotional Leaflets
2. Github HowTo: Clone Repository then make a Pull Request
3. Printing OSM Promotional Leaflets
4. Update to OSM Promotional Leaflets due to Padding errors
5. Adding a Preview JPG + crop-marks for printing

tl;dr:
You will need to install a combo of ubuntu font, a suitable Sans-Serif font (OpenSans family font is available via GitHub) + Inkscape in addition to mirroring locally the current GitHub OSM files. Then use Inkscape to import one of the SVG files, Save-As a PDF from it, and print from that. Rinse/repeat with the other SVG file:–

Updated PDFs + SVGs (identified by ‘r15371’) are currently available at https://github.com/alexkemp9/openstreetmap-promotional-leaflets. In addition I’ve made a pull-request (a request within Github for the original author to consider pulling-in my changes), so they may soon be available from the original source (next line).

… See full entry

An early happy new year to everyone!

I’m not even 6 months into mapping and I’ve already finished 7 municipalities of Bergen County. This year was great, and I plan to continue with contributing next year.

I’ve just finished Maywood after a time period of slightly over 2 weeks. Next should come Rochelle Park, and after that I might start Woodcliff Lake.

I noticed that there is a lot of industrial land in Maywood’s western portions, and that the are south of Central Avenue is very dense. Meanwhile, the northern area seems to be less dense and the eastern area is almost entirely residential. I’d say the west and south areas are like Hackensack, while the others are a bit more like the less populated places in the area.

Additionally, mapping Memorial Park made me realize how large the park actually is, and the park seems to have a lot. It shares the Memorial name with the nearby Memorial Elementary School, one of two schools in Maywood along with the one on Maywood Avenue.

Also, I’ve made it to over 750 changesets this year, and lots of map changes! I’ll almost certainly reach 800 while mapping Rochelle Park.

Click below to see Maywood!

Hello everybody,

I’m sorry because I’m not sure here’s the right place to ask this question but I’m trying to modelize a road network on my computer for a project and I don’t know how to use OpenStreetMap data to do that (or even if it’s possible). I would like to create a graph with cities as nodes and roads as paths, based on the real road network, but it would be too long to implement that myself (I need a complex graph with a least 10 000 paths) so I would like to use data from somewhere. If someone could help me, I would be very thanksful !

(I’m a French student so I guess my English isn’t perfect…)

New Organised Editing Guidelines have been approved already. But it looks like a proposal yet. It should be moved to the Policies_and_other_Documents to make it clear they are OFFICIAL guidelines. Also Older proposal Directed_Editing_Policy should be marked as DEPRECATED.

Sorry, I could not resist posting this when it popped up on Facebook. It would never have occurred to me that GPS traces can be used to create art. However….

Happy New Year to one and all!

Merry Christmas OpenStreetMap! To everyone who has helped me this year, thank you!

I’ve stumbled across Mapillary and wondered how to cover an area completely. Sadly, Mapillary help pages themselves weren’t very useful[1]: > Plan your route in advance. If you aim to cover a big area, divide it into smaller sections and think through how much you can do at a time.

What it doesn’t say however, is how to actually plan your route. My thought was that especially within areas with mapped streets you could get a route as GPX-file to follow.

Research

In my efforts I first had to learn what problem I am actually facing. It is not “Traveling Salesman Problem”[2] but actually “Route Inspection Problem”[3]. Both problems are computationally hard, i.e. NP-hard. This means you can’t solve them for larger data within any reasonable time. In this case even a “small” road network (some hundred streets) was too much for my desktop computer. However for special cases good algorithms do exist for this problem. One that I’ve found is for non-directed graphs written in Python as a plugin for QGIS, but runnable on its own[4].

Planning a route

This actually works, however you have to convert OSM-streets into usable CSV-files first. I’ve done this using a short Python script and Overpass-turbo. All steps can be seen here: https://gist.github.com/nmxcgeo/739e87333f61234aff5a32bbf735cef7

Shortcomings

There are several shortcomings of my procedure so far.

• It includes turning, where it is unlikely to be physically possible.
• It doesn’t value oneways
• and includes some links between streets that aren’t necessary to visit separately in practice.
• It doesn’t check for connectivity of all roads to the same network and doesn’t necessarily pick the largest network.

Especially because of oneways I currently wouldn’t use it in practice. You might consider it for developing countries or desaster mapping if oneway doesn’t play a role within your region.

… See full entry

It’s that time of the year & I would like to take a moment to wish everybody in the OpenStreetMap community Merry Christmas. I hope all find it within yourselves to give the best of you, not one day or two but at every moment. And also so that we can keep helping -through mapping- to make a better world.

Best wishes, Magick93.

The authoritative list of provinces, districts, and municipalities of Turkmenistan coupled with the legal definitions of types of municipalities have allowed me to categorize the “cities” of Turkmenistan following visits to many of them or collection of on-the-ground data about them either directly or through third parties. I am almost done with the list of “cities” (şäherler).

I have not yet located one city on the list: the city of Dostluk in Lebap velayat. There is a village called Dostluk that is part of another village council (Serdar geňeşligi), but it is unlikely to be a “city” unless the authoritative list of municipalities contains an error (always possible and not to be completely disregarded). Where is the mysterious city of Dostluk in Lebap velayat? It has to be there, somewhere!

I started my OpenStreetMap journey from 2015 in kamrangirchor . My and my first work is to build the kamrangirchor map. When Me and my group involved in osm we are in class 11th.Firstly we don’t understand what we are doing but we are having fun to do this work and we are also happy we get the opportunity to work with different type, different culture of people. I and my team with jorek Vyncke for the field training and small get together to grooming with the other volunteers. After that, we started the work on kamrangirchor map. We learn here how to do a field map.

It’s our last day of kamrangirchor field mapping.

Next Remote Mapping through satellite. First I get a little bit to confuse how to do this work after getting the full training. I’m a little bit curious about the work.

After the training i had done we are on work on the map.And for my study, I’ll take a break from mapping projects.

I have work in so many projects. 1.Water Managment project 2.Satkhira Project 3.Japan Flood. 4.Srilanka Project 5.Rohingya projects 6.Cyclone In Gaja project ETC. My osm Edit History

osm.org/user/Nayeem_Arv/history#map=11/23.3723/91.1804

OSM-related accounts:
OSM help
OSM forum
[OSM Wiki](osm.wiki/User:Nayeem_Arv HOTOSM