Hey lbilldt, thanks for being receptive to learning new things about golf mapping. It is much appreciated by the community. For this particular change, yes, the fairway around the green was done 100% correctly. The problem I was pointing out was the bunker that extended over/into the fairway.
If you ever have questions, I'm always happy to help.

FYI, the ways that mark the golf hole have a direction to them and go from the tee to the green. I've fixed the ones on this course, but wanted to let you know for any future mapping you might do.

RE: way/1510408359

When drawing golf course areas (such as greens, fairways, bunkers, tees, etc.), please be aware that the ways used to outline those areas can't cross over each other. Fairway outlines shouldn't cross over greens or bunkers or other fairways for example. If you could go back and clean up where you've made this mistake, that would be helpful. But more importantly, if you could stop from doing this in the future, it would be greatly appreciated. Please read the wiki for instructions and examples of how to better map golf courses: leisure=golf_course#Common_mapping_pitfalls. If you have any questions about golf course mapping, feel free to reach out.

RE: way/1107283827

Please don't overlap fairways and greens like you did on the hole mentioned above. I've cleaned it up and added the fringe around the green, but thought you'd want to know for future mapping. Thanks.

FYI, you're not creating multipolygons correctly. I'm not exactly sure how you're doing it. You should be selecting both the fairway and the green and the same time and merging them together. Somehow you are created TWO multipolygons with single members instead of ONE multipolygon with two members. Happy to help you figure this out.

RE: way/1504288758

When drawing golf course areas (i.e. greens, fairways, bunkers, tees, etc.), please be aware that the ways (lines) used to outline those areas must not cross over each other. Fairway outlines shouldn't cross over greens or bunkers or other fairways for example. Take a look at osm.wiki/File:Golf.png for an example of the "Wrong" way to map a fairway and a green, along with the correct way. There are some cases where a fringe exists around a green and you should draw the fairway outline completely around a green, leaving room for the fringe. Other times, the fairway and green butt up against each other. In that case the fairway and green should share the same nodes at the boundary between the two, and every node at the boundary needs to be shared, leaving no gaps. When drawing these shared nodes, editors like iD (built into openstreetmap.org) will "snap" to an existing node if you get close enough. If you have any questions about golf course mapping, feel free to reach out. Thanks.

For future edits, please be aware that direction matters on golf=hole lines. They should point from the tee to the green, not the other way around. Thanks.

Copied comments into original changeset (changeset/181423736).

Added a bug (https://gitlab.com/b-jazz/https_all_the_things/-/work_items/13) to the bot repo to exclude certain strings in URL params.

Hi! It looks like the website URL on way/1499962733 may have been copied from Google Maps (it contained Google tracking parameters). Please be careful not to copy information from Google into OpenStreetMap, as Google's data is copyrighted.

cc: @iandees

RE: way/1503484887 et al

When drawing golf course areas (such as greens, fairways, bunkers, tees, etc.), please be aware that the ways used to outline those areas can't cross over each other. Fairway outlines shouldn't cross over greens or bunkers or other fairways for example. If you could go back and clean up where you've made this mistake, that would be helpful. But more importantly, if you could stop from doing this in the future, it would be greatly appreciated. Please read the wiki for instructions and examples of how to better map golf courses: leisure=golf_course#Common_mapping_pitfalls. If you have any questions about golf course mapping, feel free to reach out.

I don't want to discourage you from mapping golf courses, but please spend a little more time and make the areas more closely map satellite imagery. These outlines look very janky. And you are overlapping things all over the place like the fairway that crosses over the tee box, the green that crosses over the bunker, the fairway that crosses over the rough. If you can't be more careful, it would be better if you'd just wait for someone else to get around to mapping the area.

Not sure what this is about:

way/1500883161

also, this bunker node is crossing into the fairway:

node/13741079692

Where are there nearly two identical streams around way/1351448946?

Reverted in changeset/181480961

RE: way/1498881000

When drawing golf course areas (i.e. greens, fairways, bunkers, tees, etc.), please be aware that the ways (lines) used to outline those areas must not cross over each other. Fairway outlines shouldn't cross over greens or bunkers or other fairways for example. Take a look at osm.wiki/File:Golf.png for an example of the "Wrong" way to map a fairway and a green, along with the correct way. There are some cases where a fringe exists around a green and you should draw the fairway outline completely around a green, leaving room for the fringe. Other times, the fairway and green butt up against each other. In that case the fairway and green should share the same nodes at the boundary between the two, and every node at the boundary needs to be shared, leaving no gaps. When drawing these shared nodes, editors like iD (built into openstreetmap.org) will "snap" to an existing node if you get close enough. If you have any questions about golf course mapping, feel free to reach out. Thanks.

When drawing golf course areas (i.e. greens, fairways, bunkers, tees, etc.), please be aware that the ways (lines) used to outline those areas must not cross over each other. Fairway outlines shouldn't cross over greens or bunkers or other fairways for example. Take a look at osm.wiki/File:Golf.png for an example of the "Wrong" way to map a fairway and a green, along with the correct way. There are some cases where a fringe exists around a green and you should draw the fairway outline completely around a green, leaving room for the fringe. Other times, the fairway and green butt up against each other. In that case the fairway and green should share the same nodes at the boundary between the two, and every node at the boundary needs to be shared, leaving no gaps. When drawing these shared nodes, editors like iD (built into openstreetmap.org) will "snap" to an existing node if you get close enough. If you have any questions about golf course mapping, feel free to reach out. Thanks.

And 1496737572/1496737571, 1496788849/1496788847 as well.

Hey maddog,

There are several ways in error in your edits yesterday. Check out 1496787872, 1496787850, 1496787839, 1496787857, and a bunch of cruft around 1496787868.

When drawing golf course areas (i.e. greens, fairways, bunkers, tees, etc.), please be aware that the ways (lines) used to outline those areas must not cross over each other. Fairway outlines shouldn't cross over greens or bunkers or other fairways for example. Take a look at osm.wiki/File:Golf.png for an example of the "Wrong" way to map a fairway and a green, along with the correct way. There are some cases where a fringe exists around a green and you should draw the fairway outline completely around a green, leaving room for the fringe. Other times, the fairway and green butt up against each other. In that case the fairway and green should share the same nodes at the boundary between the two, and every node at the boundary needs to be shared, leaving no gaps. When drawing these shared nodes, editors like iD (built into openstreetmap.org) will "snap" to an existing node if you get close enough. If you have any questions about golf course mapping, feel free to reach out. Thanks.

When drawing golf course areas (i.e. greens, fairways, bunkers, tees, etc.), please be aware that the ways (lines) used to outline those areas must not cross over each other. Fairway outlines shouldn't cross over greens or bunkers or other fairways for example. Take a look at osm.wiki/File:Golf.png for an example of the "Wrong" way to map a fairway and a green, along with the correct way. There are some cases where a fringe exists around a green and you should draw the fairway outline completely around a green, leaving room for the fringe. Other times, the fairway and green butt up against each other. In that case the fairway and green should share the same nodes at the boundary between the two, and every node at the boundary needs to be shared, leaving no gaps. When drawing these shared nodes, editors like iD (built into openstreetmap.org) will "snap" to an existing node if you get close enough. If you have any questions about golf course mapping, feel free to reach out. Thanks.

(You actually had correctly drawn holes in the area before, but you removed them and made them incorrect this time. I don't understand. Could you please fix them up? Thanks.)