While there, tagged the net inner areas as natural=grassland with outer role to itself.

Hi there Louis and welcome to OSM

2 points.

1) save your change set before moving to another location. Now UK Dover and Kinshasa are in the same change set and everyone in between gets this listed in their local history for days.
2) you mapped some residential road(s) in Kinshase -across- buildings. You need to move the ways (in 4 places per the warnings above), which looks from the (old) imagery informal ways i.e move the road to the side of the houses.
Somewhere there are points very close which give a vertex warning. Connect them or move one of the points away if needed.

cheers and happy mapping from Italy and dont hesitate to ask if you get stuck.

Whatever official, at the corner, north side of the new rotonda there's a road sign Strada Vicinale Acquatorbida , the historical connection to the south side of via Tirino. No signs of private. ;O)

Welcome to OSM,

You write 'ajoit' d'une maison' in France and then you also change a signmaker node somewhere on an Indian Ocean island in the same edit. Please don't do that. Keep your edits local, save them and then move to the next location. Now everyone sees this in the history list from Paris to Madagascar.

Happy mapping and ciao from Italy.
(utilisez le service de traduction si vous ne comprenez pas l'anglais)

Already fixed yesterday and OSM Inspector cleared the board on these. Added some grasland while there with 2 blank zone inside left which look like ruin/abandoned building groups

Ciao

Hi,

Please take note: You've mistagged a lot of areas in the past day with 'inner' role tags when they are in fact 'outer' borders. 'Inner' does apply when a single area is 360 degrees enclosed by another area, say a grassland patch in a forest.

Hi,

I'm impressed you're able to confirm that e.g. water taps are still there in northern and southern Italy on the same day. Did you actually 'survey' as what the StreetComplete tool is for?

cheers from middle Italy.

The forest renders again in greater zoom, so it should be good again.

Hi Achim

I spend hours yesterday resolving the many issues you(or the previous mapper) created when mapping 'inner' areas, primarily e.g. scree and bare rock inside grassland and scree and bare rock share a border, then you need to cut the border between bare rock and scree and remove the inner(all) grassland role tags in between those. Also if grassland pocket is then inside the bare rock or scree again, it get an grassland role of outer with inner to bare rock etc. If you don't understand, review the change sets I made in the region on Jan 15 how the tagging was done. The OSM Inspector tool https://tools.geofabrik.de/osmi/ will update every 12 hours where geometry and area issues are present, and many other types.

cheers.

Even if you force an upload each map add the session remains open for 60 minutes. StreetComplete is very specific in telling the contributor it's meant for on-site survey, editing, generating small bound boxes. Picture me cycling 100 miles on a day and adding while underway any anyone can figure out the route, privacy unfriendly.... edit boxes of 60x60. Level0 e.g. does so too. Save, see the counter drop back to zero and still '...session is still open, discussion possible when closed...'.

Level0 edits usually stem/launch from the Latest Keys' listing. Even when you save an edit, the sessione somehow stays open until i think 60 minutes after the last edit, here the bonding box spread covers an area from somewhere in the former ussr to NW of Florda. Every mapper inside this box gets to see these edits in their local change set history where they will appear for days near rop. Ever since knowing i wont use that direct map code editor unless just a single edit for the day.

Hi,

this ASL Roma 5 relation has been flagged as needing to be tagged as 'outer' NOT 'inner.

cheers

Driving at the hand of 'latest keys'? Please realise all your level0 edits are getting a semi global view even if it's done 1 by one.

"For Rendering"... Watch out for purists, hammer and stick thru heart you get. That said, you gave same description on Montesilvano roundabout. The central traffic island shows off-centre now, no idea if your change caused this, but 'renders' poorly now.

Please use the change set changeset/116155233 as future reference how to map 'inner' areas without causing "way_in_multiple_rings".

cheers

I've stood below the Vallelunga bridgeS i.e. they are physically 2.

You work corrected in Changeset #116137467. Cant have 'inner' areas stick out half of the outer area (forest) which caused the forest to disappear from the maps. 'Inner' has to be 100% inside without touching the outside border.

cheers

If 1520 is a monster, imagine the word for one of almost 4500 members i mistakenly touched this week and the problem i then got co-tagged for. Took 3 sessions. OSMI could not identify them all in one so it took 3 cycles to clean it up before the area was without any new alerts, so i'm fine now. The person was mapping inside areas and then wrapping the outer forest line all the way around resulting in duplicate segments and 'more than 1 ring'. Dropped mapper a note, an ID user, zero response and the next day, you can guess, repeat.

Anyway, the hands-on repetition does make it a much more speedy effort now.

Cheers

Doppio trace sopra i Viottolone Girone i Informazioni 2 percorsi uniti e rimuove i secondo. Esiste multiple altri problemi in vicine.

Hi,

Is there a reason why 2 paths nearly complete overlapping are mapped here? Why not add the supplemental tags to the previously existing path instead?

cheers