Add missing outer roles to schoolgrounds.

The test in ID history view mode is to right click a forest edge, select query features and view the whole. All borders of the forest relation are rendered in red. If you see a red line cutting in between the touching bare rock and grass sides you know what to fix. No need to wait for the 12 hourly or daily Inspector and Osmose updates for the warnings to show up.

Oh and the other things i did while there are unrelated to your changes.

You're not the only one tripping up. The simplest sample is drawings a circle called forest which is outer and map in there 2 free floating squares of grass and bare rock, the 8 out-sides of the squares is inner to the forest circle. Redraw these same squares sharing 1 side with each other. Now both have only 3 sides each that are inner to the forest circle, between the touching sides of the squares is no forest, only the grass side touching the bare rock side, outer-outer. To resolve in mapping you need to cut up the squares and remove the forest role where the squares share a side. Net, not 8 sides of the 2 squares are inner to the forest, but 6. The moment any side of a square shares a side with the circle outer, the whole square becomes outer to the circle as its nolonger 360 degrees immersed, the forest is only on 3 sides again. In ID editor edit mode the view should always have clear grass and bare rock inside rims. If it shows forest trees inside the square's rims, kind of superimposed on the grass and bare rock inside rim area, something is wrong with the role assignments.

saw you mapped (not seen by me before) tunnel area as well. You might like to dive into motorway area mapping, a popular endeavour in areas of Germany. 2 lanes, 3, 4, 5, 6, yes I've been on 8 too state side, per direction + plus the sfortuna lane. The system FAIHS renders all the same width. Then like here on the bridge, the symmetry becomes clear too... at least if it's determined the area is placed correctly, the road could use a move to the centre, if it tickles your fancy. Piers/abutments, bridge construction, name, length tags can be moved here too. The wiki proposes so IIRC. Of course there's the Italian OSM chapter...

Enjoy.

That did it, grassland in full view again \o/

The change set notes 3 problem were solved, no warnings. If the is a new problem due to my doing i will get notified automatically in my error reports i review daily.

Cheers

Hi

You should be aware that you are leaving a long trail of broken areas, duplicate segments, unclosed rings, overlapping area rings and what not problems with your landuse additions. E.g. if you map inside a woodland a bare rock and grassland area that border with each other then then border should should not any inner role tags for woodland. The result of this edit sert is that the grassland has disappeared from the map rendering.

So you're aware on before your next effort.

cheers

Hi Matteo

Is this Matthew City for real? The 'border' was mistagged as outer per Keepright, changed it to inner and added a few more buildings to 'the city'state.

While there, tagged the net inner areas as natural=grassland with outer role to itself.

Hi there Louis and welcome to OSM

2 points.

1) save your change set before moving to another location. Now UK Dover and Kinshasa are in the same change set and everyone in between gets this listed in their local history for days.
2) you mapped some residential road(s) in Kinshase -across- buildings. You need to move the ways (in 4 places per the warnings above), which looks from the (old) imagery informal ways i.e move the road to the side of the houses.
Somewhere there are points very close which give a vertex warning. Connect them or move one of the points away if needed.

cheers and happy mapping from Italy and dont hesitate to ask if you get stuck.

Whatever official, at the corner, north side of the new rotonda there's a road sign Strada Vicinale Acquatorbida , the historical connection to the south side of via Tirino. No signs of private. ;O)

Welcome to OSM,

You write 'ajoit' d'une maison' in France and then you also change a signmaker node somewhere on an Indian Ocean island in the same edit. Please don't do that. Keep your edits local, save them and then move to the next location. Now everyone sees this in the history list from Paris to Madagascar.

Happy mapping and ciao from Italy.
(utilisez le service de traduction si vous ne comprenez pas l'anglais)

Already fixed yesterday and OSM Inspector cleared the board on these. Added some grasland while there with 2 blank zone inside left which look like ruin/abandoned building groups

Ciao

Hi,

Please take note: You've mistagged a lot of areas in the past day with 'inner' role tags when they are in fact 'outer' borders. 'Inner' does apply when a single area is 360 degrees enclosed by another area, say a grassland patch in a forest.

Hi,

I'm impressed you're able to confirm that e.g. water taps are still there in northern and southern Italy on the same day. Did you actually 'survey' as what the StreetComplete tool is for?

cheers from middle Italy.

The forest renders again in greater zoom, so it should be good again.

Hi Achim

I spend hours yesterday resolving the many issues you(or the previous mapper) created when mapping 'inner' areas, primarily e.g. scree and bare rock inside grassland and scree and bare rock share a border, then you need to cut the border between bare rock and scree and remove the inner(all) grassland role tags in between those. Also if grassland pocket is then inside the bare rock or scree again, it get an grassland role of outer with inner to bare rock etc. If you don't understand, review the change sets I made in the region on Jan 15 how the tagging was done. The OSM Inspector tool https://tools.geofabrik.de/osmi/ will update every 12 hours where geometry and area issues are present, and many other types.

cheers.

Even if you force an upload each map add the session remains open for 60 minutes. StreetComplete is very specific in telling the contributor it's meant for on-site survey, editing, generating small bound boxes. Picture me cycling 100 miles on a day and adding while underway any anyone can figure out the route, privacy unfriendly.... edit boxes of 60x60. Level0 e.g. does so too. Save, see the counter drop back to zero and still '...session is still open, discussion possible when closed...'.

Level0 edits usually stem/launch from the Latest Keys' listing. Even when you save an edit, the sessione somehow stays open until i think 60 minutes after the last edit, here the bonding box spread covers an area from somewhere in the former ussr to NW of Florda. Every mapper inside this box gets to see these edits in their local change set history where they will appear for days near rop. Ever since knowing i wont use that direct map code editor unless just a single edit for the day.

Hi,

this ASL Roma 5 relation has been flagged as needing to be tagged as 'outer' NOT 'inner.

cheers