Nu nog de adressen een refresher geven, niet te vergeten ;o) Zie http://osmose.openstreetmap.fr/en/map/#zoom=16&lat=52.95445&lon=4.7939&item=xxxx&level=1,2,3&tags=addr&fixable=

Hi,

The street name on the 118 node does not match any name of a way in the neighbourhood. Should the node streetname be retagged or has the name on Strada Statale in front to be adjusted? Since 118 refers to Nazionale nord and e.g. the Michelin guide refers to Via Nazionale Nord, I think the SS16 section there needs renaming.
cheers

Actually i'm misreading. It was me who made the typo in the first place.
Sorry. Ltr can go.

If the Comments is direct at me, by my recollection i only corrected a flagged tag typo as described in the CS Comments in that change. The tag says = 0.05 Ltr but if euro is default and metric too i.e. Ltr then Ltr is probably a redundant suffix that can go. Cheap though as it reads in hindsite, 1 liter for 0.05 of water.
Ciao

Thx for resolving this. The cycleway=right was wrong for sure as the way was drawn east to west and the painted lane is on the south side going west to east i.e at minimum would have had to be cycleway=left. Your solution now renders in the cycleway view on the correct side, but the wiki recommends to just use cycleway:left=lane, the road is 2 lane, bi-directional for public transport and right of the bus lane, where it would be on a regular street too. Anyway, as the saying goes...
Have a nice day.

PS more cycle way under construction at the Mercato Coperto, railway side and a cycle bridge at the Francavilla harbour as part of the Ciclovia Adriatica AND an ebike charging station was erected on Piazza Ovidio ready to open (fees due). If my reading is right, there's going to be 10 of those stations in Pescara. Certainly the first I saw in the whole of the Pescara province.

Absence of signs. Then Streetcomplete asks. Are you sure? YES i am. Did not feel it was lower than default cycling past today.

Would have expected routers to be smart enough to direct to the Piazza side since that is the main target but hey. Anyway as i already mapped the main entrance moved the address in there and drew a path to the wheelchair friendly revolving door and will keep the poor people in mind (have, since i've been mapping main entrances on big buildings, churches and the like with pathways).
Cheers.

The saga continues: They finally completed the paint job from lungomare along D'annunzio to the junction at Via Pantini, a proper job this time, a cyclist can actually feel safe on these, but then this news popped up https://www.rete8.it/cronaca/234pescara-3/ and by jove, cycled all the way, but did not see anything resembling this. A different Pineta maybe. Meanwhile, a billboard has appeared on the Sparto side the size of a cinema screen, but all the work is just the roundabout. Tagged the sport spitch with an actual Piazza name per sign and added a huge statue of Pope Paul IV. On the Tortora side the fence is back, but not a meter of ground has been turned over, just service road works where the new building was raised at the Sparto side. More cycle way in the making. 300 meters towards Porta Nuova station. Found more unmapped painted cycleway today, will add. 200 meters 1 meter wide paintjob directly against a wall side... better not make a steering mistake. As the acronym goes YCMTSU.

Hmmm, unless this is in the wiki and approved i consider this fyi. Also what if the square is tagged as a routable pedestrian area too? Many are!

Thanks for adding the amenity=townhall tag to the building, but why did you remove the address?
ciao

Never new Norway had claim to an island just off the Antarctic,so I scrolled over and it does look like a Nordic name on there. Quite a surprise.

Hallo,

Why did you delete the area on Via Villa Magna that was tagged as Soggiorno Proposta? The name may have been in the wrong place but that does not change the mapping of the area. It's very much in use per aerial imagery of 2020.
cheers.

Hi there

Surely you had a plan, a case of being interrupted probably, with this building, showing a yellow bubble and the '1 member relation' multipolygon at Toti 41. Looks like an abode with 2 different levels.Taking antihistamines against the hands on itch to 'adjust' it (Pescara looked so clean in Osmose on the building front ;O)))
ciao

HI, gave this building at V.Venezia a once over and next door tagged Via Puglie (or should it be Puglia(?), albeit someone painted Puglie on the wall and marked it tunnel=building_passage... someone caused the buildings float at layer=1 ;O))).
If not already in the know, if you want to see your mapping results ASAP, switch to the CyclOSM view which also gives a 1 level greater zoom.
Happy TGIF

Hi
I corrected a typo on your suburb code line and OSM now wants to know what the point really is. If it is to mark a suburb, a key like place=suburb is needed as well.
Let me know.
ciao

Hi,

If you insist in doing multi country edits in single change sets, frowned upon by the mapping community, please do the commentary in English. Here in Italy and over in the Maldives German is not a frequently spoken tongue.

TIA

Hi FinixFighter,

Took the liberty to address this building you created 2 months ago at Solferino. Added levels, heights etc and a solar panel assembly and put it in a relation. I've called the solar a 'member' in the role. Not tried that one before but think it's not really the a building part. We'll see. The outline should show up in a few days, Carto is very slow to update the image render. Right now only a very small piece of the ground floor shows. I've seen solar render in a slightly different hue on other buildings I've done with this, the positve feedback a mapper needs, don't we :O)))
ciao

PS, the wiki says about roles "A role is an optional textual field describing the function of a member of the relation", i.e it really has no render or 3D impact, supposedly, and use just for easy reference as to what the part represents. Fingers crossed.

Please please don't touch any roundabout you claim to be fixing and then break because you don't see the wider implications. You cant just go merging segmented junctions. It was done for a reason. Took 24 hours for the first domino to fall "Roundabout shortcut
way/850117502 josm iD edit". The same bus route circled the junction twice and the other not at all, that cant have been the plan. Should be fine now, but unless QA spits out a report, resist the urge.
TIA

Hey there Larshei. Next time you go mapping areas, please make sure that where there are touching areas, the nodes of one area that touch on the other turn grey in ID editor view. If 3 areas touch drag the node again to ensure all 3 nodes connect. I closed 100s at the Mariendal/MTB track area. In short, if a node is white between e.g. forest and grass it means there is no connection.

Many thanks in advance.

Via Forca Caruso WAS drawn absolutely perfectly 4 years ago. Took a minute to adjust, the old route still there, just more asphalt. Only needed a 30 second visit of other available imagery to resolve. So much for my grand fixme.