Highway mapping is a big confusing thing for most mappers. This is more difficult for those who are new or not connected to the local community. Because, when are adding or mapping local highway information in the Openstreetmap suddenly they found that the local government has one highway classified system and the other side OpenStreetMap has a different classification system. So most of the time they avoid adding roads or did “road = unclassified”. In addition, many times when there is an emergency or remotely mapping highways from different countries they also inadvertently give wrong information. Because they always follow the OpenStreetMaps classification. And it makes a conflict.

So the Local community creates a Highway tag list which is based on the Government’s existing system.

If anyone wants to map by following that tag, he should follow that list or if he wants to do it in JOSM, he can easily draw the highway by adding BD_Highway_tag from JOSM’s preset preference.

How to add the presets:

• First, open the JOSM.
• Then click presets preferences from the top menu. (it will open a toolbar.)
• Then find out the “BD_Highway_tag” presets. (If it not showing on the list then just click the reload icon)
• Then add it on active presets.
• After that click OK.

Now it will be showing in the Active presets list.

… See full entry

As one of my efforts to improve the mapping of heritage features in Ireland, i started a proposal to be able to map mass rocks recently. I thought they were only “a thing” in Ireland until yesterday, when my aunt in Germany shared a photograph of the hilltop of the Sonnenstein on WhatsApp. In front of the massive cross that she probably tried to take the picture of, I discovered a boulder that looked suspiciously like a mass rock, but I could find no information online about it and it is only mapped as natural=stone. The area around that hill is a Catholic enclave in what is really core Lutheran country. So I sent an email to the tourism office of that parish/ area, asking whether they knew if it was a mass rock (which I translated as Altarstein in my email). I just got a reply from them (I’m still waiting to hear back about an email I sent 3 weeks ago to the Bishop of Ossory about holy wells) today and my suspicion was confirmed. It was put there in the 1950s (so under communist rule, when religion was frowned upon, to say the least) and is still used.

I’m very excited and I hope my proposal gets approved, so I can map this mass rock.

If I had 60 minutes to save the world, I would spend 55 minutes defining the problem and 5 mins solving it - Albert Einstein

Whichever version you have heard of the quote above, be it Einstein, Lincoln or others, they speak to a very critical aspect of tech development. Being clear about a problem (or six), will more likely lead to a useful solution. It is for this reason, that before the team at hot_tech starts ‘solutioning’, we must deeply understand the pains and problems that plague our space.

Further boiling down our findings from our Design Sprintathon posted last week and sharing more of our learnings over the last year as we engage deeper with the HOT and OSM collectives, the following post is a reduction of many conversations into what hot_tech sees as the most rich and flavourful version, from the source.

The list below is a summary of the full list here for comment. It is by no means an exhasitive list of all problems that exist, nor it is a hierarchy of which problems are more important than others. Rather, it is a list compiled of the voices we heard and what they told us was important to them. It is a list of causes and effects of pains and problems that our team desires to explore further and contribute to easing. By seeking relievers for these pains and problems, hot_tech feels we can either enable or amplify the work of those that choose to use our products as a means to meet their ends. We don’t expect our solutions to be silver bullets, nor do we feel we are the only group who can do it, but these are the problems we feel we can make both valuable and meaningful contributions toward resolving.

After reading this list, we encourage two things:

1. Reflect on it and ask ‘does this problem resonate with you?’
2. Provide feedback either in the comments here, or in this document directly.

… See full entry

I use this tool a lot with the shortcut ‘T’

It cuts ways and selects the element that needs new/different tags.

Thanks to Simon Legner who wrote it. https://github.com/JOSM/auto-tools#knife-tool

https://umap.osm.ch/en/map/open-table-tennis-switzerland_3307

Tjoho. 4000 it is.

I change the search pattern once again. There is a OGD dataset called SwissNAME3D which I filter in QGIS by “OBJEKTART” = ‘Schul- und Hochschulareal’. Then I use the Go2nextfeature3+ plugin to scroll through all these kind of schools just to look for table tennis tables. As today I passed 1200 of about 10400 school objects in that database. So expect some more TTT to come. :-)

A bit over a year ago, I received a phone call: We would like to have some project about nature and forests, where people can like go out and add data about those. Oh, it has to be really simple to use.

Some months and some funding later, the first version of MapComplete was born. While it had a specific focus then, it has grown a lot. Today, MapComplete is a map viewer for a certain theme, where the configuration for that theme decides what features are visible with which icons. When a map feature is clicked, known information is shown and the user is invited to add more information and to add pictures.

By now, there are about 20 themes for multiple topics, such as bicycle shops and pumps, playgrounds, public bookcases and much more. And it is relatively easy to create and load your own theme.

The ease of use and flexibility has lead to a steady increase of contributors that way. Thursday 15th of april was the day the editor saw its 500’th contributor:

… See full entry

Versión en español

This is a follow-up of my previous post presenting the research work.

At Humanitarian OpenStreeMap Team (HOT) we want to better use our resources to support the wider Humanitarian Open Mapping movement. That’s why we are running a research project to understand how to support contributors and communities in countries with humanitarian, disaster or development needs.

In this post I’ll summarize what happened in the first quarter (Q1) of 2021, what we learned and the plan for the next 3 months (Q2).

Our goal and key results for Q1 were:

Foundational work for the research with focus on global/shared needs is kick-started

• Stakeholders are aligned on scope of the work
• A set of prioritized core/global questions and unknowns is delivered
• Initial exploration of potential data sources is delivered
• A plan for Q2 is shaped by the insights and learnings gathered

You can see more details on on the public project brief.

Q1: Focus on global questions

… See full entry

–

Problem

Once in a while discussion arises in OpenStreetMap: which polygon to render above which. For example we have a large forest and then a lake inside it. What to do? Render water above the forest! Cool! But wait, we have a small island covered with trees in that lake, so rendering water on top of the forest hides that island. What to do? Render forest above the water!… Oh wait…

And you can change water and forest to a lot of others: residential, industrial, meadow, wetland, you name it.

The point is that this cannot be solved by deciding “what has to be rendered above/below what” (well not fully). But if you decide which objects may or may not intersect, which objects must always be covered by which etc. - then you have better described ontology. Then you cut holes in forest/water example above to get not only a correct rendering, but also an often forgotten - correct analysis (for example calculation of water/forest area).

… See full entry

Microsoft now offers openjdk which is 64 bit and JOSM runs quite nicely.

https://www.microsoft.com/openjdk

Kickstart using StreetComplete

Around 2 months ago I started my OpenStreetMap involvement with the StreetComplete app. After solving all questions in the neighborhood I live in, I was looking for the next area. During this pandemic period I’m working from home, and like to go on a walk during lunch time. Usually I take a stroll through the park close to my house, the Nelson Mandelapark. Therefore that was a nice area to continue with StreetComplete quests, adding road surfaces, lighting and details to the sport park in the middle of the park.

Adding iD and JOSM to the mix

After just a few lunch time walks I got through the StreetComplete quests for this park, but I noticed a lot of objects were still absent from the map. That is when I started with the iD editor at first, swiftly followed by installing JOSM. Now my lunch time walks had transformed into taking as much pictures as possible of my environment to be able to map all missing features of the park. Each lunch hour I would either take a stroll to make more pictures, or use the editors to add features based on my pictures of the previous day.

Community support

Later I also started to read the forum more often, joined the Discord and even joined a virtual meeting of Dutch OpenStreetMap contributors. Because of these communities I discovered resources like the BGT imagery layer, learned more about tagging practices and got to know more and more use cases of OpenStreetMap.

Outcome

All the above has lead to a much more detailed map of the park, and my neighbourhood, and gave me a nice hobby during this pandemic time :) I already started working on updating additional locations, and mapping even more detail, more updates about that later!

ℹ️ This diary entry is a copy of my twitter thread
👀 Russian translation by Google + localised visualizations

A few weeks ago we kicked off an online OpenStreetMap mapping party in Penza, Russia. Our main focus was the building coverage and I’m extremely happy to share the results!

A geovis is worth a thousand words, so:

The key sources for the building outlines where Bing and Maxar imageries. To fill in most of the missing addresses, we looked into the governmental land registry [ru]. It became a permitted data source for OSM quite recently. Some folks also checked Yandex Panoramas [ru] to read address plates or to derive 3D building shapes. This source was also allowed because the OSM community got an explicit permission back in 2011.

To help us coordinate the efforts, the area was turned into a ‘mapping cake’ on MapCraft. People grabbed ‘cake slices’ and mapped within them, thus reducing the chances of conflicts in data.

… See full entry

Excited to be here

After riding the Greyhound for a day I decided on a city I want to stay in for a bit. I’m sure I mentioned this before but I want to really use this time to enjoy myself, and hiking is a perfect way for me to do that! I went on a small hike today, had to take an Uber there but it wasn’t too bad of a drive (5-7 miles ish). Locals are probably used to seeing this landmark but I had to express my opinion on it…..

Don’t get me wrong, this rock formation does look pretty cool, but I don’t see how it looks like a pair of kissing camels like everyone says. Maybe its just the angle I took the pic at? I’ll probably use some more of my pics on social media just to spice things up, see ya guys later!

FacilMap 3 is a complete rewrite of FacilMap, with a focus on an improved, more stable and smartphone-friendly UI.

FacilMap is a privacy-friendly, open-source versatile online map that combines different services based on OpenStreetMap and makes it easy to find places, plan routes and create custom maps full of markers, lines and routes. Features include:

• Different map styles for roads, topography, cycling, hiking, public transportation, water navigation, …
• Search for places and show their information (website, opening hours, …)
• Calculate routes and adjust them by dragging. An elevation profile can be shown.
• Smartphone-friendly interface.
• Create and share custom maps with markers, lines and routes on them.
• Open GPX/KML/OSM/GeoJSON files and save them on a custom map.
• Define custom styles of markers, lines and routes and generate a legend automatically.
• Define custom form fields for the details of markers, lines and routes.
• API to embed custom maps into a website and to modify them programmatically.
• Extensive documentation.

A large geoglyph 100m x 50m owl head that seemingly appears etched on a moderately sloped terrain oriented north to south. This animal feature depiction shows an owl with a smallish beak and large eyes. This figure is amongst several other geoglyphs in the immediate area.

14°42′23″S, 75°8′16″W -14.7064237, -75.1376485 El Ingenio, Province of Nasca, Ica, Peru

It may be suggested that the geoglyph at this location might be of a forward facing owl having its right sided wing spread and the other tucked near its body as if it has already caught its prey. The owl’s head also suggests feathering along its sides.

Under the owl there is also some evidence of other shaped carvings. It might be suggested that this owl might be perched on a rock or tree-branch. Awaiting better mapping to confirm additional linework.

There are at least 32 species of night birds in Peru of which two are endemic to a specific region. This drawn bird could possibly be a tiny species called the Long-whiskered Owlet recently discovered in 1976 or the Striped Owl both well known in the region.
https://ebird.org/species/lowowl1 https://www.peruaves.org/strigidae/striped-owl-pseudoscops-clamator/

https://umap.osm.ch/en/map/open-table-tennis-switzerland_3307#9/47.0084/8.6682

We now have passed 3000 Table Tennis Tables in Switzerland alone. That is one seventh of the entire OSM TTT population. :-P

Tennis tables in Switzerland are often linked to schoolyards, public pools, campings, prisons a.s.o. Thus the main strategy is to download open datasets or OSM sets containing alike and then jumping from object to object in QGIS using the Go2nextFeature+ plugin and than screen the surroundings for Table Tennis Tables on the SwissImage. On detection you can directly jump to JOSM using the JOSM remote function of the Quick OSM plugin.

I didn’t tell any of my friends or family but I decided to take my online classes on the road. I chose to go to UW so I could see the Midwest, so its about time I actually go do that! Enjoying hiking is fitting for someone who loves maps, so I’m gonna go do that and take my classes where I can with wifi. I always thought CO was the Mountain state, but turns out that’s West Virgina Hahahaha. I guess I’m actually heading off to the Good Ol’ Centennial State. Grey Hound buses do have a pretty wide selection of stops throughout the state so I’ll just play it by ear and stay where I want, fingers crossed for a cheap Motel!

Taking a pic while in a moving bus is hard, but I tried to get what I could. More pics of my little adventure should be on my Twitter and Diary Entries at some point!

If you pay for Strava you have access to high resolution global heatmap other wise it can be accessed in a lower resolution form limiting in how far you are able to zoom in. This heat map can be utilized as a custom layer in OSM the best way to get it as a custom layer is using this extension made by ezekielf that grabs a link that you can eaisly copy and paste into OSM. Before I found this extension I used to go into the websites code inspector and do this by hand and it was a real pain in the ass for someone who knows little to nothing about source code and how cookies work.

Here is an example of how the heatmap can be utilized to map trails in OSM

… See full entry

Not the Best Week of School

I started this week off getting my GIS test score back. Lets just say I didn’t pass this one…..I guess its alright I have another midterm and a final exam, I’m just panicked about doing poorly in the class. I love GIS but I can’t take these online classes from my dorm, it just sucks. At times I just want to leave my tiny dorm and take my classes somewhere nice, McDonalds does have free wifi! I don’t think it would make my parents happy though…..

Some Brighter News!

Turns out UW has free shuttle buses for students to nearby cities, I had class off Monday for Easter so I took a nice day trip to Cheyenne! Traveling a bit is getting me in the mapping spirit, here’s a nice pic I took at Holliday Park (Nice Rainbow to brighten up my week!)