Hi
Can you check the phone format and case of name, brand, state, etc as I have had to correct several of the park edits

It is preferred that you don’t join the park boundary or other boundaries to the roadway centreline.

Hi, it is preferred that you don't use the roadway nodes when defining areas.

no response, reverted

I added Pullen Reach water area as a multipolygon. The bends are not named along this part of the river as far as I can ascertain so extended reach into the bends as if I was reaching in a sailing boat through the reach. I expect in many rivers the bend would be named (most often as a locality I assume instead of a water area) and the reach would more strictly be confined to only the straightest water section. The Pullen Reach Bushland Reserve was a convenient natural place to confine it at the southern end. Popes Reach is immediately upstream and Two Mile Reach immediately downstream but I didn't map those as haven't old out of copyright maps at hand.

I fixed this now

I reverted this because it is already mapped.
Please check before you add duplicate data

This is already mapped, so your edit reverted

I removed the name "Donga" and added the nearby house. Available imagery is old so accept you have mapped a new dwelling correctly.

Hi osmi notes error here
https://tools.geofabrik.de/osmi/?view=areas&lon=153.02912&lat=-27.46879&zoom=19
Duplicate segment and role problem

Hi John, I fixed this now

There is a house about 10 metres to the ne but it has a different shape than what you have added so I assume that building was not the intended item

There is no evidence on the satellite imagery you have used of a building here.
Has it been constructed since the latest imagery?
There is no need for name=Donga

Hi Jon, osmi finds a problem here
https://tools.geofabrik.de/osmi/?view=areas&lon=152.75519&lat=-27.68302&zoom=16
relation/16805271#map=14/-27.6858/152.7561
I suppose the middle polygon should be removed from the wood multipolygon and be tagged landuse=construction or residential.
The wood multipolygon could be dispensed with and the two remaining areas be tagged as simple wood polygons as there appears to be no longer any need to map as a multipolygon now

Name is not required for things that don’t really have a name

Pullen Reach is a section of the Brisbane River. I can’t find documentation on how to map named waterway reaches and bends in osm. One method would be to split the ‘natural=water + water=river’ polygon along this stretch between the bends and add name=Pullen Reach to it. But as there is already a very large multipolygon named Brisbane River along the length of the river, Pullen Reach would need to be added as a separate polyon.
Best practice would probably be to split the Brisbane River multipolygon here and add lines across the river at each end and use those bits to create a new multipolygon for the reach, thus not having duplicated overlapping lines.
Sometimes reaches and bends have recreation areas along these stretches that also carry the same name but these would be mapped separately from the waterway.

Hi, you have mapped as unit B but the website lists Shop 2 72 STATION ST. SOMERVILLE VIC
Can you check thanks

Try using Esri imagery instead as it is more recent, showing some building.

Parks Victoria confirmed 20th Avenue is in the Shools Area as shown on their maps so have deleted the name on the track through the lodges area.

You really need to zoom in closer and/or square the buildings. Using id, you can hit Q while the building is selected or right-click and use the 'square' icon